Premium ABS Filament

I ordered 3 spools of filament, all 3 came in the same cardboard box and each spool was vacuum wrapped in plastic. All 3 plastic bags were torn and the filament printed incredibly poorly, with the Bronze being the worst. I had to dry the filament at 165F for over 15 hours for it to be usable. I won't be purchasing again while product is shipped like this.

I wanted some metallic ABS that came in gold, silver and bronze colors. It has printed very well and vapor smoothes easily.

This ABS is great. It prints smooth as silk and doesn't stink up the room. I have a Ender 3.
Bed temp = 100 deg.
Nozzle temp = 245
Speed = 30 mm/s
Nozzle size = .8
I use an enclosure and preheat until the enclosure reaches 100 Degrees C.

Ordered 2 rolls of Black ABS to test. Prints great at 245C extrusion, 110C bed temp. With a 60C chamber only limited adhesion issues were found, most likely due to Z offset rather than material issues. Filament is wound well, no tangling issues. Filament is consistent in size and loads/unloads easily. I'd be happy to try more ABS from them when needed.

Prints like a dream!